Intel Itanium 2 processors with floating point coprocessor:

1.5 GHz with 6 MB cache

1.3 GHz with 3 MB cache

1.4 GHz with 1.5 MB cache

1.0 GHz with 1.5 MB cache

HP scalable processor chipset ZX1, including:

Processor Dependent Hardware interface

AGP/PCI-X host controller

Memory controller

8 MB Flash EEPROM

PC2100 ECC registered DDR266 SDRAM

Minimum memory: 1 GB

Maximum memory: 24 GB

Four shelves, supporting:

One front-access, slimline optical drive

Three 3 1/2-inch hard disk drives (1-inch height)

SCSI controller

66MHz, 64bit PCI based two-channel Ultra 160 SCSI host controller

IDE controller

Integrated Ultra ATA-100 capable controller that supports one optional slimline optical drive

Graphics controllers

Supported by the HP-UX operating system: ATI Radeon 7000

Supported by the Linux operating system: ATI FireGL4 ATI Radeon 7000, nVIDIA Quadro2 EX and nVIDIA Quadro4 900XGL

Three 64-bit 133MHz Peripheral Component Interconnect (PCI-X) slots, supporting all bridges and multifunction PCI-X devices.

All three PCI-X slots comply with PCI-X Specification.

NOTE: PCI-X slots are rated at 15 W and 3.3 V and they can support Universal cards.The system may have four PCI-X slots with no AGP slot.

Models include either:

Slimline 12×/8× DVD-ROM/CD-RW combo drive

OR

Slimline 8× DVD-ROM drive

One ATA-100 capable IDE connector

Main power supply connector(s)

Main chassis fan connectors

Processor fan connectors

Status panel connector

One connector for the PCI/AGP backplane. This backplane has four PCI-X connectors for rx2600 systems.

Management card (optional)

Two internal SCSI connectors

One SCSI backplane connector

Four USB 2.0 connectors

HP-UX and Linux supports HP’s USB keyboard and mouse.

9-pin serial (two, buffered)

Standard: Two UART 16550 buffered serial ports A and B (both RS-232-C)

Serial Port A may be used as console

10/100 Management LAN and 10/100/1000 LAN

External LVD/SE 68-pin SCSI

 

Front panel

Locator button and LED

Power button

Rear panel

Locator button and LED

Transfer of Control (TOC) button

Battery backed 512KB SRAM

LAN connections

10/100BT, supports Wake-On-LAN

10/100/1000BT

Located on the back of the system, this lock prevents removal of the system cover

Electromagnetic

Complies with FCC Rules and Regulations, Part 15 as a Class A digital device.

Interference

Manufacturer's Declaration to EN55022 Level A, VCCI Registered, Class A, Korea RLL

Safety

UL Listed, CSA Certified, UL GS Mark compliant with EN 60950 and EN 41003